Door Schedule Help

[Kal_digital]

I'm looking to modify the Automatic Property Source for the DOOR SIZE - PR W x H x T to read in feet and inches when I automate my door schedule.

Currently it reads in inches only.

Can this be changed?

I attached the cad drawing to clarify my problem.

Also I just seen that my door tag seems to be tagging every object in the drawing when doing multiple cross selection instead of just the doors? What give? Arhhhh!!!!!

Using ACAD 2009

Thanks
Juan

[dzatto]

I'm looking to modify the Automatic Property Source for the DOOR SIZE - PR W x H x T to read in feet and inches when I automate my door schedule.

Currently it reads in inches only.

Can this be changed?

I attached the cad drawing to clarify my problem.

Also I just seen that my door tag seems to be tagging every object in the drawing when doing multiple cross selection instead of just the doors? What give? Arhhhh!!!!!

Using ACAD 2009

Thanks
Juan
Select the schedule, right click and go to Edit Schedule Table Style, then go to the Columns tab. Select the door size column, then hit the modify button. Where it says data format, change it to Length - Long.

Door tags will tag doors and door/window assemblies. If you are using both, there's no way around it that I know of. You'll have to pick them individually instead of doing a window. You could try putting the doors on a different layer than the assemblies, then freezing that layer prior to tagging.

[Kal_digital]

AHHHH.....dzatto....YOU ARE MY HERO!!!!!

The door tag seems to be tagging everything even text, lines, walls, and doors.

i just want it to tag doors....something is fishy.

[dzatto]

AHHHH.....dzatto....YOU ARE MY HERO!!!!!

The door tag seems to be tagging everything even text, lines, walls, and doors.

i just want it to tag doors....something is fishy.
Just so you know, I don't wear capes. ;)

yeah, something isn't right if it's tagging lines, text, etc. I've never had that happen before. Maybe you should run a repair. I'd search a bit more for an answer before I did that, though. Also, it sounds like you're running ACA, not vanilla cad. There is a separate forum for ACA stuff. Here's the link. You'll probably have better luck there.
http://forums.augi.com/forumdisplay.php?f=379

I just tagged your drawing, and it's happening to me also. That is wierd. I've never seen that before.