Can't Reload unloaded CAD Link

[tonyisenhoff]

CAD link(s) originally loaded and working. Have since been unloaded, but now when attempting to reload, the won't... The loaded box will not check and they don't appear in the project.

Things I've tried.
1. Reload
2. Reload From
3. Copy CAD link to new location & reload from there
4. Change path type (Relative & Absolute)

Nothing works...

Anything else I could try before removing and starting the link process all over again from scratch?

I think this problem is related to and upgraded project...

[azmz3]

it sounds like you may have a bad CAD file, I would check the actual CAD file and make sure it still exists/is not corrupted. if everything is fine on that end, I would delete the link and start over in the process. it looks like you went through the options to check a link, and if nothing else works, start over.

[tonyisenhoff]

CAD file is ok. I was able to l ink it into a new project with no issues...

I guess I'll have to remove & unload. Just didn't want to with 6-7 CAD files.