stucco representaion in elevations

[vanderloo5]

I'm looking for the best way to represent stucco in my elevations. I tried doing a filled region with sand but it's pretty heavy, (scale wise), and a little tedious to apply on all walls and remove from windows. I thought painting the walls would be the best way but I don't see any materials close to what I need.
Thanks

[twiceroadsfool]

Go to the help file, and look up assigning the material TO the wall, and the surface pattern TO the material. It will show up automatically.

[douggodfrey]

Do as twiceroads mentioned and use concrete for the surface pattern, it's a little coarser than sand.

[vanderloo5]

The concrete is a good fill pattern but, for whatever reason, some of the walls I select show the fill above the fascia line. As in, behind the roof. How do I edit this?
I should elaborate a little more on that; In my elevations, some walls display up beyond the fascia, (gutter), line, and some don't??? I used the linework tool to get rid of the wall lines above fascia but when I paint them with any material it applies all the way up.

[d.stairmand]

Have you tried attaching the wall top to the bottom of the roof?