Printable View
Hi All,
Our office is getting ready to start doing some big buildings (i.e Condos up to 24 storys) and was wondering can Revit do something that large? Also what is the tallest building anyone has done using Revit? Would you be willing to share some of your experiences and knowledge? Any help is a great help and would be extremely appreciated.
Thanks,
Revit will say its possible to do that large of a building, I think I could do it, but I would need a very experienced revit staff. We are currently working on a 7story condo/mixed use project. and the major problem is its impossible to create a typical unit plan that you copy and mirror and rotate throughout the bldg. so weve had to abandon groups, now you might be able to figure out something with linked files, but then you couldn't schedule the info in your main project.
Its a hard call. I'd like to try it, but until groups/workset work right your in for quite a ride. I'd love to hear of someone doing this type of project successfully.
Ask your reseller or Revit support for a copy of the Revit Hotel5 CD. It includes a simulated 300ksf hotel project done here at Autodesk Revit. A team of 10 people worked on the project using Revit 5.0 over the course of 5 months. The CD includes the project file, pdfs of many sheets, and a slide presentation outlining key techniques used by the production team. This should help you get a large project such as this set up and help you evaluate the best method to proceed.
We're working on a 13 story remodel of assisted living to condominiums and adding a floor. It's has been a learning experience but were are getting it done.
Trent
Scott,Quote:
Originally Posted by sbrown
You are right that "unit" groups are VERY buggy, but we've been able to work around most of the bugs. We use unit groups and worksets for all of our multi-unit projects. Today, I’m working on one of our 4 story (five with basement) 120 unit apartment building for seniors. All of the units are made up of just about a dozen different groups. However, the system is far from perfect.
You have to follow the "rules" exactly. By "rules" I mean anything that doesn't cause a weird group bug;) For example; nested groups (such as a bathroom/closet group) inside a unit group (one bedroom apartment) don't always mirror so well. Both groups as a whole will mirror fine but sometimes a door in the nested group will reverse it's swing, like a bathroom entrance door will suddenly swing out instead of "in". The way to fix this is to edit the nested group that has been mirrored NOT by first using the edit group button then using the edit group button to get to the offending nested group but rather by simply tabbing to reach the offending nested group and editing it right there. When you finish the edit all the offending mirrored nested groups will be correct. It’s as if revit keeps two different copies of the same group in it’s database (under the hood) and sometimes they don’t jive.
I know that doesn’t make sense, but it works. It’s one of those things that comes from blood sweat & tears, it’s trial and error.:roll:
Another thing is that you have to be extremely careful about what goes into the group and what doesn’t. I personally include the hallway walls and the entry doors, but I don’t include the unit demising walls. I don’t include the exterior walls or the windows, but I do place reference plane in the unit group at the centerline of the living room and one at the centerline of the bedroom. I then explicitly place the windows then align and lock them to said reference planes. This way the groups don’t contain the windows, but the groups can still control them. You have to create special families for host mounted casework so it’s not host based any more because I don’t include the demising walls in the group. I use special door families with shared parameters, so I can use a multi-category “DOOR” schedule, so I can use the filter tool because the regular door schedules can filter out specific doors (such as unit doors from common door). <sigh>The list goes on and on…….then worksets add yet another layer of complexity…..revit really needs to make this easier.
Is it worth it? Well, when I look at the alternative, which is AutoCAD 2000, then YES!! Plus, once you have good system down and a kick-*** template, you can get it going much faster. But like Scott said, having experience revit users helps.
I have started 60 storey hotel late last year on release 4.5 and later on converted to 5.0.
The new tower was to sit over existing 15 storey hotel and adjacent to another existing 39 storey hotel.
I was the only one working on the project with best "budget" hardware available at the time.
Well, I was able to produce building skin of all 3 buildings, windows, roofs, floor plates, shear walls, and couple of typical floor layouts of the new tower. Existing floor layouts were to be covered by Autocad overlays.
Project was converted to Autocad after that because I felt that my hardware can't handle it efficiently any longer. Regeneration started occuring after almost every zoom, and it was lasting longer and longer. There was also a plotting bug (fixed in 5.1) which was causing 35-45min. plot generation per sheet, and I had only 4 sheets created so far. Overall, it was disasterous experience for me.
My opinion is that with hardware most of us have, you can't do full C.D. set. At the time of my adventure I was seeking some guidelines from Revit with respect to performance improvements if better hardware was used, but response was that they have no means to do it !?
Alek
Here are some pics that show what we include in groups/nested groups:
http://www.zoogdesign.com/albums/rev...up_4.sized.gif
http://www.zoogdesign.com/albums/rev...up_3.sized.gif
Chris, what's the minimum hardware (processor and RAM) you'd recommend for working in a project like your 120 apartment units? (note that I said "minimum" rather than "perfect"). In this moment I'm creating my groups for a multistorey project like yours, but I'm afraid my hardware (P-III with 512MB RAM) might be too little for such task. I really -need- to finish this project with Revit, so maybe I'll need to upgrade my hardware. Any suggestion welcome!!
I thought on using linked files instead of groups (which could perhaps decrease the RAM usage and increase speed), but I read that light sources are buggy in linked files, so groups seem to be the best option.
Another related question:
I need to do detailed views of each apartment type. Do you think it's best to create each apartment type in a separate file, define its detailed views there, and later save the apartment as a group to disk (to be included in the multistorey file)? Or do you prefer to do the whole work in a single file?
I think it would be best to do it in separate files for performance reasons, but then, if I need to change a unit, I'd need to re-save the group and re-load it in the multistorey file...
I am going to ask my reseller for a copy of the Revit Hotel5 CD. Also I am going to use all of the excellent info provided here and try to setup the best template I can for such a project and will let everyone know how it all comes out.
Thanks,
Hey Z, what are you doing for the hatched floor areas? A thin floor object, or a filled region?