1 Attachment(s)
DB attribute visibility not working.
I have been sitting here trying to get these 2 attributes to display correctly using visibility. At first I was just modifying an old block and copied the second attribute from the first, but renamed it, and read forum posts and then made both attributes from scratch and they still won't behave right. Attribute #1 (Address) is only supposed to be visible in the Intelligent states, but it shows the whole time. It has a default value, which does change when I use the block, but I read in someones post this shouldn't affect anything. At a loss as to what's wrong now.
I just tried one thing, attribute #2 (Wireguard) was set to constant, and once the block was inserted in a dwg it didn't have a grip where you could move the attribute around and reposition, but once I unchecked the constant setting and was able to move it again, now it won't behave correctly either, which if I can't move the attributes they are of no use to me, so anyone who knows a possible work around please fill me in. See attached dwg.
Re: DB attribute visibility not working.
can you save the sample back to 2009 or 2008? If so I may have a chance to take a look at it tomorrow.
john
1 Attachment(s)
Re: DB attribute visibility not working.
Here's the dwg in 2007 format.
1 Attachment(s)
Re: DB attribute visibility not working.
The easiest thing I found was to lock the attribute and then attach a point parameter/move, this keeps the attributes together when one is moved in case something changes in the future arrangement.
Something weird is happening though when I open the drawing the open in block editor pop-up is displayed. Normally when I save the block with a name and insert into the drawing this does not happen.
john
Re: DB attribute visibility not working.
With your suggestion I got it working the way I wanted it. I figured having an attribute locked would override any parameter so I didn't try it, guess I should've. As for the block editor pop up upon inserting the block, I'm not sure why you were getting that, when I insert it I don't get that issue happening. Thanks for your input, much appreciated :)
Re: DB attribute visibility not working.
It is strange, and happened on three drawings I opened today. Something is not right with Autocad today hopefully it keeps running until the weekend.
john