See the top rated post in this thread. Click here

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Could anyone share their CAD Standards Manual

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    2008-05
    Posts
    5
    Login to Give a bone
    0

    Default Could anyone share their CAD Standards Manual

    I am new to the CAD management game. I have been handling customizations, setups, troubleshooting etc. at my company since about the time I started a year and a half ago and was recently asked to write a CAD standard manual. I have a pretty good idea about what should be in there and what I would like to see in there, but would like a couple to look at as templates for writing and organizing my company's manual. I do not intend to copy the manual as we already have most of the standards in place, just not documented, I just would like some guidance on a format and making sure I cover the bases.
    I would also like to make this a training manual as well that gets more into how and why of the drafting/sheet setup, so any help in that department is also great.
    Thanks in advance, and all tips are appreciated.

    Lawrence
    Last edited by lawrencerobinson5872708; 2009-11-10 at 04:04 PM.

  2. #2
    The Silent Type RobertB's Avatar
    Join Date
    2000-01
    Location
    Seattle WA USA
    Posts
    5,859
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    Have you considered doing the manual online rather than a printed manual? There has been some discussion related to that here in this forum in the last few months.

    For example, we are moving our manual to a wiki and when that is done, I will be adding XAML files to the CUIx files to point users to the wiki.
    R. Robert Bell
    Design Technology Manager
    Stantec
    Opinions expressed are mine alone and do not reflect the views of Stantec.

  3. #3
    Member
    Join Date
    2008-05
    Posts
    5
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    Believe me I would love to put it online. Unfortunately my company is not exactly forward thinking when it comes to using the web/technology. While I have recently gotten my company to buy new $3800 machines for out Revit users, we have a website that's not been updated since July 20, 2001 and it looks like it was 8 years before that. So for now I am going to have to do it the old fashion way.

  4. #4
    The Silent Type RobertB's Avatar
    Join Date
    2000-01
    Location
    Seattle WA USA
    Posts
    5,859
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    You are not limited to web-based technology. Others are using help files, for example.

    If you are using AutoCAD 2009 or higher you can use XAML file(s) in the CUI.

    I'm not saying a printed manual is bad (ok, I am), I'm just seeing if you have though outside the box.

    (Printed manuals are "bad" because, in my experience, they are rarely read and just waste paper. With online manuals/help the user can print the stuff they often use and get the rarely used info at their fingertips when needed.)
    R. Robert Bell
    Design Technology Manager
    Stantec
    Opinions expressed are mine alone and do not reflect the views of Stantec.

  5. #5
    Member
    Join Date
    2008-05
    Posts
    5
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    How do the XAML files in the CUI work? We keep up to date on AutoCAD so we're using 2010. I can see how they are helpful when it comes to showing how a command works, but how this would be applied to replacing a standards manual. I am all for getting standard and training information to people right through the program rather than a book, as you say it's more likely to be used. The only problem I could see with a system that would have you searching for answers to questions is how do people know the questions to ask without it being laid out before them in print. I am more than willing to think about this out of the box, just want to make sure I end up with a system that allows people without experience working with us to start up and have all the information available in a way that will be usable and helpful.

  6. #6
    AUGI Addict
    Join Date
    2015-12
    Posts
    2,095
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    Ooooh XAML... something else I need to read up on.

    Who says "online" has to be "online"? Print to PDF, or any other format in a read-only location, and throw in a link in the menu, or a desktop shortcut. Word and Adobe Reader are readily available and have all the required search tools. Leave the tech stuff like wikis until later when you have the standards format established and have had time to sit down with the IT folks.

    And I share the sentiments about hard copies. As I always say, "Its out of date the minute it gets printed."

  7. #7
    The Silent Type RobertB's Avatar
    Join Date
    2000-01
    Location
    Seattle WA USA
    Posts
    5,859
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    Quote Originally Posted by lawrencerobinson5 View Post
    How do the XAML files in the CUI work? We keep up to date on AutoCAD so we're using 2010. I can see how they are helpful when it comes to showing how a command works, but how this would be applied to replacing a standards manual. I am all for getting standard and training information to people right through the program rather than a book, as you say it's more likely to be used. The only problem I could see with a system that would have you searching for answers to questions is how do people know the questions to ask without it being laid out before them in print. I am more than willing to think about this out of the box, just want to make sure I end up with a system that allows people without experience working with us to start up and have all the information available in a way that will be usable and helpful.
    The XAML file(s) would be useful for documenting the tools in the UI, not the entirety of what a CAD Manual normally covers.
    R. Robert Bell
    Design Technology Manager
    Stantec
    Opinions expressed are mine alone and do not reflect the views of Stantec.

  8. #8
    Member
    Join Date
    2017-12
    Posts
    24
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    thanks, I am in the middle of trying to write, and implement a hard copy and share point version of a CAD standards manual as well. 21 pages.....nice, this is a great help

  9. #9
    Woo! Hoo! my 1st post
    Join Date
    2021-08
    Location
    Portland, Or
    Posts
    1
    Login to Give a bone
    0

    Default Re: Could anyone share their CAD Standards Manual

    Does anyone know the best way to make sure everyone in the company follows the CAD Standards?

  10. #10
    Administrator Ed Jobe's Avatar
    Join Date
    2000-11
    Location
    Turlock, CA
    Posts
    5,917
    Login to Give a bone
    1

    Default Re: Could anyone share their CAD Standards Manual

    Robert Green had a nice series of articles last year. Here is one. Some others.
    C:> ED WORKING....

Page 1 of 2 12 LastLast

Similar Threads

  1. Standards "Manual"
    By tgifford.145154 in forum CAD Standards
    Replies: 1
    Last Post: 2008-05-15, 07:54 PM
  2. CAD Standards manual, freely sharing with everyone...
    By bob.kalsi66006 in forum CAD Standards
    Replies: 53
    Last Post: 2008-04-18, 11:24 AM
  3. Replies: 4
    Last Post: 2006-03-22, 12:23 AM
  4. Replies: 2
    Last Post: 2006-01-27, 05:29 PM
  5. What too put in a CAD Standards Manual
    By cparvez in forum CAD Standards
    Replies: 3
    Last Post: 2005-05-12, 04:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •