Results 1 to 3 of 3

Thread: Conduit Bend Radius

  1. #1
    Active Member
    Join Date
    2004-06
    Posts
    95
    Login to Give a bone
    0

    Default Conduit Bend Radius

    I am having a problem using conduits and getting the radius to change and display properly. I am using the RMC Conduit without fittings and when there is a bend in the conduit Revit places a Conduit Elbow without fittings RMC Standard. I then select the elbow and change the radius but it doesn't update graphically.

    Another user in our office does the same thing I am doing and using the same families and he can get it to display correctly. See attached.

    Any thoughts or workarounds?

    I am new to Revit MEP but know Revit Architecture.

    Thanks,
    Jason
    Attached Images Attached Images

  2. #2
    I could stop if I wanted to RevitNinja's Avatar
    Join Date
    2007-09
    Posts
    490
    Login to Give a bone
    0

    Default Re: Conduit Bend Radius

    The second screen shot shows that the path to the lookup tables is incorrect. Lookups used to only affect pipe fittings, but starting in RMEP 2011, they became responsible for the conduit fittings as well. Check your file path in the Revit.ini

    Also, the bend radius is controlled via "Electrical Settings." Under Conduit Settings, click "Size" and you will be able to adjust the bend radius for each conduit type.

  3. #3
    Active Member
    Join Date
    2004-06
    Posts
    95
    Login to Give a bone
    0

    Default Re: Conduit Bend Radius

    Thanks. The path was incorrect.

Similar Threads

  1. 2013: Cable Tray Fitting bend default radius
    By ftonelli in forum Revit MEP - Families
    Replies: 3
    Last Post: 2017-10-13, 09:40 AM
  2. 2011: Anyone knows how to change several conduit bend radius globally?
    By yuhonggao758424 in forum AMEP General
    Replies: 3
    Last Post: 2013-07-24, 01:11 PM
  3. 2013: Pipe fitting - bend radius
    By desandli836892 in forum Revit MEP - Families
    Replies: 5
    Last Post: 2013-02-19, 01:39 PM
  4. Changing the radius of a Conduit/Pipe bend
    By pirit4 in forum ACA/AMEP Tutorials
    Replies: 2
    Last Post: 2010-03-05, 02:43 PM
  5. Dynamic radius bend
    By stephen.coff in forum Dynamic Blocks - Technical
    Replies: 4
    Last Post: 2005-12-22, 05:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •