Results 1 to 4 of 4

Thread: Questions diverses

  1. #1
    Member
    Join Date
    2011-06
    Posts
    4
    Login to Give a bone
    0

    Default Questions diverses

    Bonjour,

    Je débute avec Revit Structure et j'ai besoin de quelques informations

    Est ce que Revit prend en considération

    1 - les caractéristiques mécaniques de sol (raideur,..) ? Si oui plus d'informations SVP

    2 - les caractéristiques des matériaux (je suppose que oui)

    Je voulais aussi connaitre les logiciels compatible avec REVIT pour un calcul en éléments finis 3D et un calcul dynamique.

    Merci Beaucoup

  2. #2
    Administrateur gravelin's Avatar
    Join Date
    2004-06
    Location
    Besançon - France
    Posts
    3,835
    Login to Give a bone
    0

    Default Re: Questions diverses

    Je ne suis pas spécialiste sur structure, mais je peux déjà répondre sur certains points.
    Concernant les matériaux. Tu as un onglet spécifique dans les propriétés des matériaux où tu peux faire cela.
    Le logiciel de calcul Robot est capable de se connecter à Revit Structure.
    Yves GRAVELIN
    Revitez !

    " Comtois, rends-toi ! Nenni ma foi ! " devise des francs-comtois
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    "Y a quéqu' chos' qui cloch' là-d'dans
    J'y retourn' immédiat'ment. "
    Boris Vian

  3. #3
    Active Member JPTrehen's Avatar
    Join Date
    2005-06
    Posts
    61
    Login to Give a bone
    0

    Default Re: Questions diverses

    Bonsoir,

    Je ne suis pas très régulier sur les forums... pardon a vous tous et a Yves en particulier
    Voici un blog que je suis qui est très utile sur le sujet : http://bimapps.typepad.com/
    et en particulier ce billet: http://bimapps.typepad.com/bim-apps/...ructure-1.html

    Cordialement.
    Jean-Paul Tréhen
    BIM AEC Senior Technical Consultant EMEA

  4. #4
    All AUGI, all the time
    Join Date
    2008-11
    Location
    Australia
    Posts
    754
    Login to Give a bone
    0

    Default Re: Questions diverses

    I will respond in english because my french is terrible, sorry...barely conversational level!

    Soil materials and strengths, absolutely not.
    Revit is NOT a civil design package, and you are best to use a specific civil design package.
    Revit will give you a nice topography for your model (which you import from your civil design package), other than that revit is currently very weak at anything to do with ground work.

    I attempted one day to set different ground level strata based on results from several boreholes at my site.
    It's simply not possible yet.

    As for materials, I assume you mean other structure such as steel or concrete members. The answer to this one is yes, you should download the content for your region from the Autodesk support site, and all of these have the correct weights (kg/m) etc for all of the relevant members already programmed in for you.

Similar Threads

  1. 2014: 2 stair questions and 1 general coordination questions
    By utakecare2003 in forum Revit Architecture - General
    Replies: 0
    Last Post: 2014-08-16, 09:55 PM
  2. Drafting Questions (was>(Stupid) Newbie Questions)
    By Andrew Dobson in forum Revit Architecture - General
    Replies: 5
    Last Post: 2005-05-12, 09:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •