Results 1 to 3 of 3

Thread: how to make a spring moved

  1. #1
    Member
    Join Date
    2012-08
    Posts
    2
    Login to Give a bone
    0

    Default how to make a spring moved

    hi, how can we make a spring visually moved? can anybody explain the issue step by step please. thanks in advance

  2. #2
    All AUGI, all the time
    Join Date
    2000-12
    Location
    Williamsport, PA
    Posts
    641
    Login to Give a bone
    0

    Default Re: how to make a spring moved

    Attach the two parts here that will be in mated to the spring.
    There are at least 3 methods.
    I would use a parameter for height of spring and animate parameter in Inventor Studio.
    Easiest method might be to add Spring Force in Dynamic Simulation, but that requires knowledge of Dynamic Simulation Environment.
    Third technique would be adaptive components technique. You should probably stick with the first method to start.
    http://home.pct.edu/~jmather/content..._Tutorials.htm
    AU 2007 Avatech Altogether Smarter Inventor On-line Challenge 1st Place
    Autodesk Inventor Certified Expert
    Certified SolidWorks Professional
    Williamsport, PA

  3. #3
    Member
    Join Date
    2012-06
    Posts
    28
    Login to Give a bone
    0

    Default Re: how to make a spring moved

    I found a good tutorial for an adaptive spring here: http://designandmotion.net/autodesk/...y-and-springs/

    Rob.

Similar Threads

  1. Spring
    By aledtaylor79401 in forum AutoCAD Gallery
    Replies: 22
    Last Post: 2006-01-19, 12:46 PM
  2. constraint a spring
    By aval_29 in forum Inventor - General
    Replies: 1
    Last Post: 2005-11-21, 02:27 PM
  3. 3D Spring
    By paul.43008 in forum AutoCAD General
    Replies: 1
    Last Post: 2004-10-20, 04:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •