Results 1 to 3 of 3

Thread: Quantity Takeoff of CMU and Rebar?

  1. #1
    Member
    Join Date
    2009-06
    Posts
    19
    Login to Give a bone
    0

    Default Quantity Takeoff of CMU and Rebar?

    Hello, Is it possible to do a quantity take off of CMU and Rebar? If so how can I do this?

  2. #2
    ACA/AMEP Community Chair stelthorst's Avatar
    Join Date
    2003-10
    Location
    San Francisco CA
    Posts
    1,190
    Login to Give a bone
    0

    Default Re: Quantity Takeoff of CMU and Rebar?

    Hi Nathan,

    I would say that you could do it. I'm assuming your CMU is a wall style so you could make a property set that multiplies the length and height of the wall and divides it by block size. For example, for standard 16" X 8" block you would the length and height of the wall and divide it by 128 sq in or .88 sq ft. Rebar could probably be done in a similar fashion by taking the wall size and multiplying it by a "rebar factor" Neither one of these will be exact but it would probably get you close enough for budgetary purposes.

    Hope this helps get you started. If not post back and we'll step you through the process.
    Scott Telthorst
    Quality Control Manager
    Helix Electric, Inc.
    www.helixelectric.com

    Some see the glass as half full, others as half empty. As an engineer I see the glass as twice as big as it needs to be. ~Unknown~

  3. #3
    All AUGI, all the time
    Join Date
    2011-05
    Posts
    926
    Login to Give a bone
    0

    Default Re: Quantity Takeoff of CMU and Rebar?

    Actually, there is already a feature in ACA that automatically schedules the wall area, both net and gross. For figuring masonry you need the net area.

    To get the number of units you need to export the schedule to an Excel file and add a formula to the wall area. You can do the same for reinforcement.

Similar Threads

  1. 2012 Quantity Takeoff of CMU and Rebar?
    By NATHAN46290 in forum QTO General
    Replies: 0
    Last Post: 2012-12-17, 03:37 PM
  2. AutoDesk Quantity Takeoff
    By SunYog in forum DWF Viewer - General
    Replies: 2
    Last Post: 2008-07-28, 03:32 PM
  3. Electrical Quantity Takeoff
    By chitnismahesh in forum Revit MEP - General
    Replies: 1
    Last Post: 2008-06-24, 01:40 PM
  4. Quantity Takeoff Enhancements
    By civil3d.wishlist1941 in forum Civil 3D Wish List
    Replies: 0
    Last Post: 2007-12-11, 10:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •