Results 1 to 2 of 2

Thread: Metric to English to Metric Linetype scale Issue

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Woo! Hoo! my 1st post
    Join Date
    2017-08
    Posts
    1
    Login to Give a bone
    0

    Default Metric to English to Metric Linetype scale Issue

    Ive run into an issue in which linetype scaling is being very difficult.

    What i have is 3 different CAD files.
    1. Architects demo background set in metric units (mm)
    2. A working drawing xrefing the architect background set in English units (inches)
    3. A sheet file xrefing the working drawing in metric units (mm) with a 1:50 Scale viewport.

    The problem im running into is that i cannot get the architects demo line work and the working drawings demo line work (and symbols) to both show as demo in the sheet file.
    Ive set backgrounds and working drawings to a LTscale of 25.4 and 0.0393 to account for the metric conversion but i cannot seem to get it to work. Am i missing something? Any help would be greatly appreciated.

  2. #2
    AUGI Addict
    Join Date
    2015-12
    Posts
    2,095
    Login to Give a bone
    0

    Default Re: Metric to English to Metric Linetype scale Issue

    Regardless of what the units setting in the files are, it depends on which LIN file the linetypes were defined in. It's not uncommon for metric drawings to have linetypes loaded from ACAD.LIN (inch definitions) with a global LTSCALE of 10.

    Check the annotation scale on the viewport, too. Even though it may have a scale factor of 1:50 the annotation scale could be any entry in the annotative scale list.

    A sample file, cleaned of any proprietary information, would also be helpful.

Similar Threads

  1. Metric/English Dimensions
    By chris.spenski in forum Revit - Platform
    Replies: 3
    Last Post: 2011-07-08, 09:06 PM
  2. English to Metric
    By rvthor in forum MDT - General
    Replies: 4
    Last Post: 2008-07-18, 03:30 PM
  3. ABS 2006 Switching English to Metric
    By mark.cowley145504 in forum AMEP General
    Replies: 0
    Last Post: 2007-08-24, 04:09 PM
  4. Change the units of dimensions from Metric to English
    By robert.1.hall72202 in forum AutoLISP
    Replies: 2
    Last Post: 2007-02-21, 01:36 PM
  5. Scale drawing from metric to english
    By andycrox in forum AutoCAD General
    Replies: 14
    Last Post: 2007-01-23, 03:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •