how to draw a line with out using the Get Method?



The AddLine method requires a start point and an end point. How do you plan to get the points? Do you have them in a file or something?
C:> ED WORKING.... ▒
i declared first for user to pick arbitrary point
with that point i call it as x(0) and x(1)... began to draw line
y(0) = x(0)
y(1) = x(1) + 186.5455
Set line = ThisDrawing.ModelSpace.AddLine(x, y)
z(0) = y(0) + p(sn  1) 'here is where_
z(1) = x(1)
Set line = ThisDrawing.ModelSpace.AddLine(x, z)
I would save it as a block and then insert it at the picked point and rotation. Unless the above symbol will always be oriented in the upright position, creating it with lines would be very tedious.
C:> ED WORKING.... ▒
I was going to write the code and loop through every time the span of beam changes.
Here is a code i have come so far please comment on it.
Public Sub TestGetPoint()
Dim varPick As Variant
'' get input from user
With ThisDrawing.Utility
varPick = .GetPoint(, vbCr & "Pick a point: ")
.Prompt vbCr & varPick(0) & "," & varPick(1)
'draw the line
Dim x(0 To 2) As Double
Dim y(0 To 2) As Double
Dim z(0 To 2) As Double
Dim i(0 To 2) As Double
Dim b(0 To 2) As Double
Dim c(0 To 2) As Double
Dim d(0 To 2) As Double
Dim e(0 To 2) As Double
Dim j(0 To 2) As Double
Dim k(0 To 2) As Double
Dim o As Integer
Dim sc As Double
Dim sm As Double
Dim m As Integer
Dim n As Integer
'''' hree needed span(sn).. sn length...
o = 5
Dim p(0 To 100) As Double
Dim f(0 To 100) As Double
' span length data
p(0) = 2700
p(1) = 2000
p(2) = 2500
p(3) = 2500
p(4) = 2500
' column data
f(0) = 400
f(1) = 500
f(2) = 600
f(3) = 800
f(4) = 800
For sn = 1 To o
'some hw .. if().. statmnt to pik
If sn = 1 Then
x(0) = varPick(0)
x(1) = varPick(1)
' no need for go to
' _______GoTo_ty______' use the GoTo.. to escape
'_______GoTo_ty______' use the GoTo.. to escape
Else
'here need code to do the first sum.. and assign variable kn to it
For m = 2 To sn
If m = 2 Then
sm = p(m  2)
' MsgBox (sm)
Else
sm = sm + p(m  2)
' MsgBox (sm)
End If
Next m
'here also need a code to do the sum .. and asign variable kc to it
' sn = 4
For n = 2 To sn
If n = 2 Then
sc = f(n  1)
' MsgBox (sm)
Else
sc = sc + f(n  1)
' MsgBox (sm)
End If
Next n
x(0) = varPick(0) + (sm) + (sc) ' dn=ln+cn .. ln = length of span cn = column thic
'here also need a code to do the sum .. and asign variable kc to it
' x(0) = varPick(0) + ((sn  1) * p(0)) + ((sn  1) * 400) ' dn=ln+cn .. ln = length of span cn = column thic
' here i need smw
' use the fibinaci addition schema...
' need For loop here for ((sn1)*3700)...
x(1) = varPick(1)
'here some how add the distance.. wanted to varpick(1)+###
'_______GoTo_ty______start
End If
y(0) = x(0)
y(1) = x(1) + 186.5455
Set line = ThisDrawing.ModelSpace.AddLine(x, y)
'here you need to find ln or l(1)... from user..
z(0) = y(0) + p(sn  1) 'here is where_
z(1) = x(1)
Set line = ThisDrawing.ModelSpace.AddLine(x, z)
i(0) = z(0)
i(1) = z(1) + 186.5455
Set line = ThisDrawing.ModelSpace.AddLine(z, i)
' here is where ... beam width is added..b1 say
b(0) = y(0)
b(1) = x(1)  200 '..the length..
c(0) = y(0)
c(1) = b(1)  186.5455
Set line = ThisDrawing.ModelSpace.AddLine(c, b)
'ehre s
' here needs also sm...
' if sm=0.. then === p(0)
d(0) = b(0) + p(sn  1) ' here is where l(1) goes
d(1) = b(1)
Set line = ThisDrawing.ModelSpace.AddLine(b, d)
e(0) = d(0)
e(1) = d(1)  186.5455
Set line = ThisDrawing.ModelSpace.AddLine(d, e)
If sn = 1 Then
k(0) = c(0)  f(0) ' here add column width c1
k(1) = c(1)
j(0) = x(0)  f(0) 'here add c1
j(1) = y(1) ' jtotal = 2*186.5455 + b1 here add c1
Set line = ThisDrawing.ModelSpace.AddLine(k, j)
line.Update
Else
line.Update
End If
'_____ this is where the (span length of above 1) s1 > 1 ends...
Next sn 'loop for sn
End With
End Sub