Results 1 to 5 of 5

Thread: CENTEREXE set to percentage of the Diameter

  1. #1
    Member
    Join Date
    2017-06
    Posts
    3
    Login to Give a bone
    0

    Default CENTEREXE set to percentage of the Diameter

    You should be able to set (for example) CENTEREXE to ".15d". CENTEREXE should be able to find circle diameter, and adjust the extension to be a specific percentage. Add type-in capability in defineing CENTEREXE so the centermark extensions (whiskers outside the circle) are a percentage of the circle diameter. I like them to be 15% of the circle diameter, myself. Using a constant distance works for circles of similar size, but huge or tiny circles need a new distance. I USED to make centermarks with one of the three CENTER linetypes, across quadrants, scaled 1.3 from the center, and maybe LTS or Linetype Scale in properties adjusted. Wish this could be done with the setting to CENTEREXE. -paul

    Note: I tried to add this to the Wish List, but couldn't get past the required application dro down list. Maybe my brouzer is old?

  2. #2
    Mod / Salary / SM Wanderer's Avatar
    Join Date
    2001-12
    Location
    St. Louis
    Posts
    5,278
    Login to Give a bone
    0

    Default Re: CENTEREXE set to percentage of the Diameter

    Quote Originally Posted by p_burgener751498 View Post
    You should be able to set (for example) CENTEREXE to ".15d". CENTEREXE should be able to find circle diameter, and adjust the extension to be a specific percentage. Add type-in capability in defineing CENTEREXE so the centermark extensions (whiskers outside the circle) are a percentage of the circle diameter. I like them to be 15% of the circle diameter, myself. Using a constant distance works for circles of similar size, but huge or tiny circles need a new distance. I USED to make centermarks with one of the three CENTER linetypes, across quadrants, scaled 1.3 from the center, and maybe LTS or Linetype Scale in properties adjusted. Wish this could be done with the setting to CENTEREXE. -paul

    Note: I tried to add this to the Wish List, but couldn't get past the required application dro down list. Maybe my brouzer is old?
    With the Wishlist, you do have to have the product you want to submit a list for, under your profile here as a product that you use.
    Melanie Stone
    @MistresDorkness

    ARCHIBUS and AutoCAD Expert (I use Revit, too)
    Technical Editor
    not all those who wander are lost

  3. #3
    Mod / Salary / SM Wanderer's Avatar
    Join Date
    2001-12
    Location
    St. Louis
    Posts
    5,278
    Login to Give a bone
    0

    Default Re: CENTEREXE set to percentage of the Diameter

    Quote Originally Posted by Wanderer View Post
    With the Wishlist, you do have to have the product you want to submit a list for, under your profile here as a product that you use.
    https://www.augi.com/account/products
    Melanie Stone
    @MistresDorkness

    ARCHIBUS and AutoCAD Expert (I use Revit, too)
    Technical Editor
    not all those who wander are lost

  4. #4
    Member
    Join Date
    2017-06
    Posts
    3
    Login to Give a bone
    0

    Default Re: CENTEREXE set to percentage of the Diameter

    Thanks, Melanie. I expected there to be a big drop down list on the Wish site. I've got it fixed now. -paul

  5. #5
    Mod / Salary / SM Wanderer's Avatar
    Join Date
    2001-12
    Location
    St. Louis
    Posts
    5,278
    Login to Give a bone
    0

    Default Re: CENTEREXE set to percentage of the Diameter

    Quote Originally Posted by p_burgener751498 View Post
    Thanks, Melanie. I expected there to be a big drop down list on the Wish site. I've got it fixed now. -paul
    Great, thanks for the follow up!
    Melanie Stone
    @MistresDorkness

    ARCHIBUS and AutoCAD Expert (I use Revit, too)
    Technical Editor
    not all those who wander are lost

Similar Threads

  1. Percentage of wall openings
    By angelo in forum Revit Architecture - General
    Replies: 2
    Last Post: 2010-04-14, 03:06 PM
  2. Task scheduler tool tip display percentage completed
    By IanR in forum Inventor Wish List
    Replies: 0
    Last Post: 2009-02-01, 06:51 PM
  3. creating percentage summary of areas
    By jacek.brzezowski in forum Revit - Platform
    Replies: 2
    Last Post: 2008-10-20, 08:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •