Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: TABLEINDICATOR = 1 row numbers and column letters do not display

  1. #1
    Member Shoey's Avatar
    Join Date
    2004-10
    Location
    Bradford, England
    Posts
    35
    Login to Give a bone
    0

    Default TABLEINDICATOR = 1 row numbers and column letters do not display

    Hi all,

    The variable TABLEINDICATOR in my drawing is set to 1 but when i double-click
    inside a table cell, the labels across the left side abd top do not appear.
    Am i missing something here?

    Using AutoCAD Map 3D 2007.

    Cheers

  2. #2
    The Silent Type Mike.Perry's Avatar
    Join Date
    2000-11
    Posts
    13,656
    Login to Give a bone
    0

    Question Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    Hi

    Is this issue / problem occurring in all drawing files OR just the odd one or two?

    Have a good one, Mike

  3. #3
    Member Shoey's Avatar
    Join Date
    2004-10
    Location
    Bradford, England
    Posts
    35
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    Mike,

    This happens in every drawing!

    Cheers

  4. #4
    The Silent Type Mike.Perry's Avatar
    Join Date
    2000-11
    Posts
    13,656
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    Quote Originally Posted by mark.shoesmith
    This happens in every drawing!
    Hi

    Can you please post a drawing file for us to look at... we can then try and determine if the issue / problem is drawing based OR AutoCAD based (be it Hardware / Software / User based) OR...

    Have a good one, Mike

  5. #5
    100 Club KansasCAD's Avatar
    Join Date
    2002-02
    Location
    Derby, Kansas
    Posts
    114
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    We have never been able to see these either. In any drawing. If someone has any answer I would sure appreciate you posting it here.

    We have a few summary of quantities sheets that we grab totals from one table and populate a different table (all in model space) and then we do viewports to show each table in the titleblock in a layout tab. If would sure be alot easier to track if the column and row numbers showed up.

    Thanks,

    Daryl

  6. #6
    Member Shoey's Avatar
    Join Date
    2004-10
    Location
    Bradford, England
    Posts
    35
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    All

    I opened the drawing with the table in vanilla AutoCAD 2007 and AutoCAD 2008 which
    we have in other divisions in my office and the rows and columns show up when i edit the table.
    Then i opened the drawing up again in AutoCAD Map 2007 and when i edit the table they do not show up.

    So my computer has a problem with a setting somewhere??

    Many thanks

  7. #7
    The Silent Type Mike.Perry's Avatar
    Join Date
    2000-11
    Posts
    13,656
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    Quote Originally Posted by mark.shoesmith
    I opened the drawing with the table in vanilla AutoCAD 2007 and AutoCAD 2008 which
    we have in other divisions in my office and the rows and columns show up when i edit the table.
    Then i opened the drawing up again in AutoCAD Map 2007 and when i edit the table they do not show up.

    So my computer has a problem with a setting somewhere??
    Hi Mark

    Given the above information (it would appear to be a Map 3D issue / problem), I have therefore moved this thread from the AutoCAD Tables forum to here.

    Thanks, Mike

    Forum Manager

  8. #8
    All AUGI, all the time Capt. Computer Crasher's Avatar
    Join Date
    2006-12
    Location
    South of North & East of West
    Posts
    786
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    Quote Originally Posted by Mike.Perry View Post
    Hi Mark

    Given the above information (it would appear to be a Map 3D issue / problem), I have therefore moved this thread from the AutoCAD Tables forum to here.

    Thanks, Mike

    Forum Manager
    Mike,

    I don't think is only in map I use both Civil 3D 2007 and Civil 3D 2008 which do have components of MAP but I am having the same problem the TABLEINDICATOR = 1 and still no column or row indicators also KansasCAD uses Civil3D as well.

  9. #9
    Geospatial Moderator Jmurphy's Avatar
    Join Date
    2000-11
    Location
    TN/KY Area
    Posts
    1,640
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    But in LDT2007 it works. Also note that with C3D & Map3D 2008 the tabletoolbar varible settings have no effect and acts just like the tableindicator.

  10. #10
    All AUGI, all the time Capt. Computer Crasher's Avatar
    Join Date
    2006-12
    Location
    South of North & East of West
    Posts
    786
    Login to Give a bone
    0

    Default Re: TABLEINDICATOR = 1 row numbers and column letters do not display

    so you concurr this is a Civil 3D /Map 3D vertical problem. I don't think AutoDesk is aware of it. I am using SP2 for Civil 3D 2008 and it still does not work. also does not work in SP3 Civil 3D 2007

Page 1 of 2 12 LastLast

Similar Threads

  1. Adding numbers, ingoring letters
    By robert.1.hall72202 in forum AutoLISP
    Replies: 16
    Last Post: 2016-11-05, 02:09 AM
  2. Window tags with letters not numbers
    By jastuccio in forum ACA General
    Replies: 4
    Last Post: 2009-08-12, 05:17 PM
  3. Ability to have letters as well as numbers in as revision sequence numbers
    By revit.wishlist1942 in forum Revit Architecture - Wish List
    Replies: 1
    Last Post: 2007-10-01, 01:07 PM
  4. Call out sections as numbers or letters?
    By crohloff.72988 in forum CAD Standards
    Replies: 9
    Last Post: 2006-06-26, 06:44 PM
  5. sequence of numbers and letters
    By hevgee in forum AutoLISP
    Replies: 3
    Last Post: 2006-03-17, 04:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •