Results 1 to 2 of 2

Thread: Comparing Lidar Surface Creation Techniques

  1. #1
    The Silent Type
    Join Date
    2019-09
    Posts
    1
    Login to Give a bone
    0

    Default Comparing Lidar Surface Creation Techniques

    Hello everyone,

    I am experimenting with different surface creation methods from lidar data and was noticing a few differences that I could not find the answers for through my own googling.

    Method 1 - convert lidar (.las) to bare earth (.xyz) file and create point cloud in Recap, then create surface within Civil 3d from that point cloud (no filtering)
    Method 2 - take same (.xyz) file and create surface from point file under Surface definitions

    I used some large data sets so maybe differences would stick out a little more.

    Method 1 resulted in a file size of 131,168 kb compared to Method 2 of 85,722 kb
    Number of points the same (expected)
    max and min and mean elevations all the same
    Method 1 2d/3d area - 23,342,940.16 ft^2/23,468,623.94 ft^2 vs Method 2 23,341,991.45 ft^2/23,467,085.66 ft^2 - close but different, i imagine if i created them again C3D might solve the triangle slightly different resulting in another number?
    Number of Triangles - method 1 = 3,237,049 vs method 2 = 3,237,010

    Biggest difference seems to be just the size of the drawing which is pretty significant.

    Anyone have an explanation? Or recommend maybe a better process for creating surfaces wit lidar? I am fairly new to this and would like to see what the rest of the industry really does.

    Thanks

  2. #2
    Login to Give a bone
    0

    Default Re: Comparing Lidar Surface Creation Techniques

    Here is a third (free) method, which will eliminate the hoop jumping since it goes straight from LAS/LAZ to a Civil3D TinSurface.

    Civil3D: Lidar Straight To TinSurface
    http://dotsoft.com/blog/?p=508

Similar Threads

  1. 2017: Lidar Stream Channel Surface Accuracy
    By kylehalchin in forum AutoCAD Civil 3D - Surfaces
    Replies: 0
    Last Post: 2017-08-09, 01:00 PM
  2. Create a Surface from Z points from Lidar image?
    By dave_kikkert575985 in forum AutoCAD 3D (2007 and above)
    Replies: 1
    Last Post: 2012-08-14, 12:24 PM
  3. Grading creation tool and Lidar surfaces
    By Chud in forum AutoCAD Civil 3D - Grading
    Replies: 2
    Last Post: 2011-08-17, 11:10 PM
  4. lidar surface keeps crashing Land Desktop 2007
    By brooke.107938 in forum Land Desktop - General
    Replies: 1
    Last Post: 2007-03-25, 03:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •