Results 1 to 2 of 2

Thread: Civil 3D 2021 - Pressure pipe runs

  1. #1
    Member
    Join Date
    2012-07
    Posts
    3
    Login to Give a bone
    0

    Default Civil 3D 2021 - Pressure pipe runs

    just started looking into civil 3d 2021 and the pressure pipe runs. I create a new parts list, from the PVC Material. When i ran the add new pipe run, it would not add the bends to the pipe run. If i used the preloaded part list water and ran the new pipe run, it would add the bends. still new to pressure pipes. looking for insight into why it only works for Autodesk part list and not a new one. thanks

  2. #2
    Certifiable AUGI Addict cadtag's Avatar
    Join Date
    2000-12
    Location
    Cairo - no, not Illinois
    Posts
    4,817
    Login to Give a bone
    0

    Default Re: Civil 3D 2021 - Pressure pipe runs

    can you add bends by picking the 'add fitting' button? using the PVC catalog, with PVC pipes and DIP fittings in my parts list, I don't get bends (or the full compass) using the pipes and bends tool, but can manually add the bends.

    If i use PVC bends, in the parts list then it works with the compass and adding bends directly, but limited sizes and angles (no 11.25 bend for example) make it not that useful

    this is c3d 2019 -- sounds like no improvements in 2021
    Last edited by cadtag; 2020-08-21 at 07:53 PM.
    Real pirates wear silk suits & ties, and write EULAs
    The only thing more dangerous to the liberty of a free people than big government, is big business.

    Toward a Sustainable Water Future: Visions for 2050 http://ascelibrary.org/doi/book/10.1061/9780784412077

Similar Threads

  1. 2020: Electrical Features in Revit 2021
    By David Robison in forum Revit MEP - General
    Replies: 1
    Last Post: 2020-04-09, 06:39 AM
  2. 2020: 2021 - Drag Layout to SSM Not Working?
    By stusic in forum AutoCAD Sheet Set Manager
    Replies: 1
    Last Post: 2020-04-07, 11:40 PM
  3. Negativ Pressure Drop and Static Pressure
    By amigost in forum Revit MEP - General
    Replies: 2
    Last Post: 2014-02-27, 05:14 AM
  4. 2011: Pressure Drop/Static Pressure
    By RevitSOS in forum Revit MEP - General
    Replies: 3
    Last Post: 2013-04-05, 08:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •