Angled cut in curtain walls (wall cladding) - workarounds don't seem to work

[alessandro25]

Hi guys, I've been trying to do an angled cut on this wall cladding in order to match with the rafter/beam without success.

Attachment 109087(fig. 1)

Details:

- I created this wall cladding using a Metric Curtain Wall Panel template.

- Each part of the curtain wall is looking like this, I think the high number of individual parts worsen the problem (since it covers long faces of the shed).

Attachment 109088(fig. 2)

What I have tried with no success:

- Cut geometry using a reference plane;

- Attach top/base using a reference plane;

- Edit profile/boundaries of the curtain wall;

- Select curtain wall and change the angle of the grid;

- Repeat the profile (fig 2.) a couple times after each other on family creation in order to create longer/less parts(?).


I posted the same topic in other forums/facebook and I think the solution would come from mass use as well, I did some trials with mass without good results either. I'm a beginner/intermediate on revit so I might be doing some dumb mistakes.

Other guys suggested me to use mullions only, but I wanted to create a proper cladding profile for it.

A user from the Autodesk forum gave a good solution but I couldn't manage to do it. Link for the post:


If you guys have any ideas I would much appreciate it.
Thanks.