Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: polylinetype attitude adjustments

  1. #1
    100 Club andrewp's Avatar
    Join Date
    2003-06
    Posts
    149
    Login to Give a bone
    0

    Default polylinetype attitude adjustments

    I saw a command recently that would adjust the linetype segments evenly and continuously thru a node... I've lost it... and I can't find the command either...

    thanks...

  2. #2
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,128
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    In the Properties palette (or dialog box if using older versions) you can set the Linetype Generation flag to enable that ability for the selected polyline.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  3. #3
    100 Club andrewp's Avatar
    Join Date
    2003-06
    Posts
    149
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    Richard

    I think that's it... thanks again...

    Drew

  4. #4
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,128
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    If not come back and tell me to get it right the next time.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  5. #5
    100 Club andrewp's Avatar
    Join Date
    2003-06
    Posts
    149
    Login to Give a bone
    0

    Cool Re: polylinetype attitude adjustments

    Actually, it's ont exactly what I was looking for... I remember seeing on a sight with tips and tricks for AutoCAD... I just can't find that site again...

  6. #6
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,128
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    Can you explain it a little more then? I'm having some trouble understanding the issue.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  7. #7
    Certifiable AUGI Addict ccowgill's Avatar
    Join Date
    2004-08
    Location
    Iron Station, NC
    Posts
    3,198
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    are you referring to the divide, or measure command? you can space objects evenly along a polyline

  8. #8
    AUGI Addict Maverick91's Avatar
    Join Date
    2000-12
    Location
    Grand Prairie, Texas, USA
    Posts
    1,324
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    Quote Originally Posted by richardl.25628
    Can you explain it a little more then? I'm having some trouble understanding the issue.
    When you have a pline that is a hidden or centerline or has some other dash linetype assigned to it, what happens at an intersection? Does the dashed pattern continue or is it interrupted? Make sense?

  9. #9
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,128
    Login to Give a bone
    0

    Default Re: polylinetype attitude adjustments

    Quote Originally Posted by Maverick91
    When you have a pline that is a hidden or centerline or has some other dash linetype assigned to it, what happens at an intersection? Does the dashed pattern continue or is it interrupted? Make sense?
    Did you not read again? I know what it is. The OP said that was not what he was looking for.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  10. #10
    100 Club andrewp's Avatar
    Join Date
    2003-06
    Posts
    149
    Login to Give a bone
    0

    Unhappy Re: polylinetype attitude adjustments

    richard
    i think the command would also adjust the items (such as fence posts) evenly... thus the beginning and the end of the pline look identical... does that make any since?

    i saw it while browsing for something else, and unfortunately, i was in the middle of a project and couldn't take time to play with it...

Page 1 of 2 12 LastLast

Similar Threads

  1. Hatch Adjustments
    By Wish List System in forum Revit Architecture - Wish List
    Replies: 0
    Last Post: 2012-08-17, 01:14 AM
  2. Mass with an attitude
    By bsqwared in forum Revit - Platform
    Replies: 0
    Last Post: 2009-08-04, 11:17 PM
  3. monitor color adjustments
    By .chad in forum Hardware
    Replies: 4
    Last Post: 2008-01-15, 02:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •