Guide or Standard Drawing Register, for reference, review

[tolifiers]

Hi from Theo at Auckland New Zealand

We have just joined a small office where standards were at best lacking badly.

Things are now changing very quickly.

I would appreciate in what ever format available
a guide or an international standard drawing register
so that we can set some standards to adhere to
in this office.

Look forward to a few replies

you can e-mail

theo@lifecaresolutions.co.nz

We are involved in private hospitals , medical centres , Lifestyle Retirement Property and facilitiy buildings Design.

Lifecare Solutions Limited
Planners and Project Managers
38A Allens Road,
East Tamaki
Auckland
Tel: 09 273 1517
Fax: 09 273 1516
http://www.lifecaresolutions.co.nz

[Mike.Perry]

Hi

Have you tried the forum search facility... should find lots of practical and useful information.

Plus, here are a few links to threads to get you going in the right direction ( if I have understood your above request correctly )...

CAD Standards

What too put in a CAD Standards Manual

CAD Standards Checklist

I think I'm going to loose it.... CAD STANDARDS

Introducing a CAD Manual & Standards into a new company

Have a good one, Mike

[mohan]

Hi,

If you are using only xls sheets, then find the attached files which might help you.
there will be two types i.e one will be Pre Construction or say the GFC drawings and the other will be As Built darwings.

Both the formates are attached.


Mohan,
nagamohan1981@gmail.com