Results 1 to 8 of 8

Thread: AutoCAD LT 2006 - Layfrz and Xlist commands

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Woo! Hoo! my 1st post
    Join Date
    2006-05
    Posts
    1
    Login to Give a bone
    0

    Question AutoCAD LT 2006 - Layfrz and Xlist commands

    I could not find equivalent commands in Autocad LT2006. Any suggestions?

    Thanks.

  2. #2
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,095
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Quote Originally Posted by cruzdc
    I could not find equivalent commands in Autocad LT2006. Any suggestions?

    Thanks.
    To my knowledge, those are Express Tools and therefore not supported in the LT version. Sorry.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  3. #3
    The Silent Type Mike.Perry's Avatar
    Join Date
    2000-11
    Posts
    13,656
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Hi "cruzdc" ( Sorry, I do not know your real name )

    Please note I have *moved* this thread from the CAD Mgmt. General forum to this one, as I feel this particular forum is a more appropriate place for such a topic.

    Thanks, Mike

    Forum Manager

  4. #4
    100 Club The VLG's Avatar
    Join Date
    2005-04
    Location
    on the up....
    Posts
    137
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Quote Originally Posted by cruzdc
    I could not find equivalent commands in Autocad LT2006. Any suggestions?

    Thanks.
    Sorry dude, but they are only available in full cad & to the best of my knowledge there isn't an equivalent.
    You could try setting up a New Group Filter in your layer manager if there was a particular set of layers you wanted on/off

  5. #5
    Member KRISTIVETTE's Avatar
    Join Date
    2006-03
    Location
    Dallas
    Posts
    43
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Quote Originally Posted by cruzdc
    I could not find equivalent commands in Autocad LT2006. Any suggestions?

    Thanks.
    I AM ALSO SPOILED AND WANTING QUICK LISP COMMANDS IN ACAD2006 LT BUT.............SORRY YOU CAN'T DO ANY LISP COMMANDS IN THE LT VERSION....................

  6. #6
    I could stop if I wanted to lmitsou's Avatar
    Join Date
    2003-01
    Location
    UK
    Posts
    219
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    There is a way to enable Lisp and Express Tools in Autocad LT but you need to have a third party add-on program that gives AutoCAD LT these options and capabilities. Check the following threads for more information:

    http://forums.augi.com/showthread.php?t=36975

    http://forums.augi.com/showthread.php?t=29950

    http://forums.augi.com/showthread.php?t=27499

    http://forums.augi.com/showthread.php?t=13368

  7. #7
    I could stop if I wanted to tyshofner's Avatar
    Join Date
    2004-03
    Location
    Dallas, Tx
    Posts
    229
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Also, some express tools have been incorparated into LT2007. I know "lyrfrz" is one of those tools, can't remember the others right now, but a quick check of the white papers at autodesk should tell you what else was added.

    On a side note "otrack" has also been incorparated into LT2007 (FINALLY, I've been waiting on this one for a while!!!!!)

    Ty

  8. #8
    I could stop if I wanted to lmitsou's Avatar
    Join Date
    2003-01
    Location
    UK
    Posts
    219
    Login to Give a bone
    0

    Default Re: AutoCAD LT 2006 - Layfrz and Xlist commands

    Quote Originally Posted by tyshofner
    Also, some express tools have been incorparated into LT2007. I know "lyrfrz" is one of those tools, can't remember the others right now, but a quick check of the white papers at autodesk should tell you what else was added.

    On a side note "otrack" has also been incorparated into LT2007 (FINALLY, I've been waiting on this one for a while!!!!!)

    Ty
    The tools that have been added to LT2007 are all the commands of the Express Tools LAYERS menu.

Similar Threads

  1. autocad 2006 -- commands not working
    By brenda.132460 in forum AutoCAD General
    Replies: 5
    Last Post: 2010-10-19, 08:42 PM
  2. Time delay when using certain commands in AutoCAD LT 2006
    By nw-surv3 in forum AutoCAD LT - General
    Replies: 2
    Last Post: 2007-02-14, 12:02 PM
  3. Undocumented AutoCAD 2006 Commands - EAttExtEdit and EAttExtUpdate
    By Mike.Perry in forum AutoCAD Tips & Tricks
    Replies: 2
    Last Post: 2006-11-10, 09:22 AM
  4. No XList in AutoCAD LT 2007
    By son.do in forum AutoCAD LT - General
    Replies: 4
    Last Post: 2006-08-17, 11:14 PM
  5. Replies: 2
    Last Post: 2006-02-10, 06:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •