Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Revit Systems

  1. #1
    I could stop if I wanted to Doug's Avatar
    Join Date
    2003-10
    Location
    Michigan
    Posts
    468
    Login to Give a bone
    0

    Exclamation Revit Systems

    Has anyone heard about Revit Systems yet? It appears we are going to get an MEP program as a nother add on like structures.
    Thanks
    Doug

  2. #2
    Certifiable AUGI Addict Dimitri Harvalias's Avatar
    Join Date
    2015-12
    Location
    Vancouver, BC Canada
    Posts
    3,753
    Login to Give a bone
    0

    Default Re: Revit Systems

    Revit systems will be bundled with ABS in release 1.

    http://usa.autodesk.com/adsk/servlet...&siteID=123112

    In its R1 form it is being positioned more as a design tool than a full blown solution. From what I've seen, on the design and calculation side of things, the tools available for mecahnical and electrical engineers will be huge time savers . If Revit Structures is any indication the development will be rapid and should round out the Revit family really well.
    Can't wait to get into my first whole building modeled in Revit from beginning to end.

  3. #3
    AUGI Addict truevis's Avatar
    Join Date
    2004-07
    Location
    Massachusetts, USA
    Posts
    1,191
    Login to Give a bone
    0

    Default Re: Revit Systems

    MEP guys around where I am (Washington, DC) are chomping at the bit to be able to use it. Seems like it's going to be fabulous.

  4. #4
    AUGI Addict Andre Baros's Avatar
    Join Date
    2003-12
    Location
    Point of no return
    Posts
    1,611
    Login to Give a bone
    0

    Default Re: Revit Systems

    I saw a demo recently and even the tiny bits I saw were awesome. I heard that the release is getting pushed back to May.

  5. #5
    Active Member
    Join Date
    2004-10
    Location
    Appleton, WI
    Posts
    55
    Login to Give a bone
    0

    Default Re: Revit Systems

    I have only seen the screen shots on the Autodesk web site but I can't wait to sit down and play with it. With the changes to rooms the amount of data that will be easily be able to schedule and work with will be huge. Next week I am leaving to go work for an electrical manufacturer so unfortunately it will come too late for me to use it on an actual project.

  6. #6
    Member kchenault's Avatar
    Join Date
    2005-02
    Location
    Ottawa, KS
    Posts
    45
    Login to Give a bone
    0

    Default Re: Revit Systems

    I attended a seminar last Thursday and they said it shipped last Wednesday. That was April 26.

  7. #7
    AUGI Addict christopher.zoog51272's Avatar
    Join Date
    2003-04
    Location
    Cinnaminson, NJ / NYC
    Posts
    1,096
    Login to Give a bone
    0

    Default Re: Revit Systems

    Our MEP consultants have it in hand so it has definetly been released, it's just not downloadable yet.
    Chris
    SOM | New York

  8. #8
    100 Club pdavis's Avatar
    Join Date
    2005-01
    Location
    Tampa, Fl
    Posts
    188
    Login to Give a bone
    0

    Default Re: Revit Systems

    Systems is awesome, as long as you get the Revit Building model from the architect, otherwise you the MEP firm need to build a Revit Building model to take full advantage of the tools in Revit Systems. A good rule is if you have a Revit Building model, use Systems, no Revit Building model, use ABS. This is why Autodesk is only selling Systems with ABS.

  9. #9
    I could stop if I wanted to neb1998's Avatar
    Join Date
    2004-06
    Location
    Chicago
    Posts
    373
    Login to Give a bone
    0

    Default Re: Revit Systems

    From personal experience i can aknowledge what you have heard, as a tester i have been using the software for about a year and the only major mechanical drawbacks are with plumbing systems as this wasnt addressed in the first release. I do not know what autodesk has planned for plumbing systems but i imagine it will come in a later release.

    Looking forward to seing the final release and will receive my cd in a few days.....Saved us major time even in its infancy on construction documents.
    Ben Kane


  10. #10
    Member marty_rozmanith's Avatar
    Join Date
    2004-06
    Posts
    28
    Login to Give a bone
    0

    Default Re: Revit Systems

    Congrats to the Revit Systems team for crossing the finish line.

    -M

Page 1 of 2 12 LastLast

Similar Threads

  1. Revit MEP Systems
    By junzap2006 in forum Revit MEP - General
    Replies: 1
    Last Post: 2010-11-17, 02:48 PM
  2. Revit Systems
    By bpl.law in forum Revit MEP - General
    Replies: 12
    Last Post: 2010-07-15, 04:08 PM
  3. Revit Systems 9.1
    By sifuentes in forum Revit MEP - General
    Replies: 1
    Last Post: 2007-12-01, 11:30 PM
  4. Ductwork from Revit Systems in Revit Building
    By Fatboy in forum Revit Architecture - General
    Replies: 7
    Last Post: 2007-04-30, 04:59 AM
  5. Revit Systems
    By khomburg in forum Revit Architecture - General
    Replies: 1
    Last Post: 2005-06-13, 03:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •