I have found this problem when the linework is on layer "Defpoints" and layer "0" is switched off or frozen. Just switch layer "0" back on and the items will be selectable.
|
I have found this problem when the linework is on layer "Defpoints" and layer "0" is switched off or frozen. Just switch layer "0" back on and the items will be selectable.
The 0 layer is on, no change. I have just worked out that the corruption happens when i change the standard font to Arial, which is the way that we prefer our drawings to look now. Don;t know if that will be any help
Ah, text detritus. I actually get this alot, it is a display problem, have you tried a "REGENALL"? That usually clears it for me.
can't seem to open the drawing, getting message here that it isn't a dwg file?
hmmm, something very wrong with this particular drawing I think!! try this version
I tried the regenall command, they were still there!
What acad version is this file?
AutoCAD LT 2007, are you struggling to open it?
Yes. I was on 2006 at work.Originally Posted by abertigger
Okay.
You have about 22000 text objects that contain no text.
Type QTEXT, select On and do a REGEN. Then you will be able to select them.
Last edited by jaberwok; 2006-08-01 at 07:21 PM. Reason: file not attached. :-(
that worked, thank you!!!