Set Layer to 0 when launching Xref Manager

[kennet.sjoberg]

Hi Kennet, . . .
p.s. If you post the entire routine I will try it.

IT IS the entire code a few lines do it all.

1. Type (vl-load-com) at AutoCads Command:
2. paste the code in the first "Code: window" in my previous post
3. paste the code in the second "Code: window" in my previous post

Thats it then use Xref commands as you always have done.

My previous post LINK


: ) Happy Computing !

If you have Tim's reactor loaded you should unload it first.

To remove my reactors
paste the code in the third "Code: window" in my previous post and type at AutoCads
Command: Remove_Xref_Attach_Reactor

[martin_m]

Hi Kennet,

I unloaded Tims routine and loaded your routine, it all appears to work in 2004

the only problem is the layer we have to use a designated layer and Tims routine does

use one. Thank you for comments and support.

Regards,

Martin

[kennet.sjoberg]

. . . it all appears to work in 2004 . .

Glad to hear that.. . because it should work.

: ) Happy Computing !

BTW
if you are sure that the layer "MyLayer" exist,
you can replace "0" with "MyLayer" in the code ( two places ).