Results 1 to 10 of 11

Thread: ???1-2-3 Revit: BIM and Algorithmic Form Finding

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    2007-05
    Posts
    8
    Login to Give a bone
    0

    Default ???1-2-3 Revit: BIM and Algorithmic Form Finding

    Has any one look at this article and been able to read what you type into the family type box to make it happen?


    http://aec.cadalyst.com/aec/article/....jsp?id=402757

    I'm trying to do the twisting tower thing, and having problems with controling the amount of twist in the bleng.

  2. #2
    All AUGI, all the time archjake's Avatar
    Join Date
    2003-07
    Location
    Tucson, AZ
    Posts
    531
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    Get a hold of some of Phil Read's families. Some of which were shown in that write up. I think you can get them from the AU download area... Someone else may have a link.
    Jake Boen, Architect
    www.InPlaceArchitecture.com
    www.BIMproductivity.com
    Tucson, Arizona

  3. #3
    Member
    Join Date
    2007-10
    Posts
    4
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    I cannot find the models of Phil Read regarding this, has anyone out there successfully followed this tutorial and could you share your model? thanks

  4. #4
    All AUGI, all the time Elmo's Avatar
    Join Date
    2005-04
    Location
    South Africa
    Posts
    959
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding


  5. #5
    AUGI Addict
    Join Date
    2003-09
    Posts
    1,907
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    This is a journal file Phil Posted a while back in response to "can't do that in Revit." Close Revit, drag the journal file over the icon and sit back and watch. Then save the project file. Disclaimer - I have not tried the journal file in 2008 - might not work as journal files DO change. I have the rvt file if it doesn't work for you.This journal file creates the tower shown in this IMAGE.

    NOTE: This is NOT a zip file. Simply rename the file extension to be only .txt. It was renamed zip to upload due to file size.
    Attached Files Attached Files
    Last edited by SkiSouth; 2007-10-31 at 12:19 PM.

  6. #6
    Member
    Join Date
    2007-10
    Posts
    4
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    Skisouth,

    It did not work for 2008 or Rev 9.1 so it would be great if you can post the tower file. Thanks everyone for responding so far....

  7. #7
    AUGI Addict
    Join Date
    2003-09
    Posts
    1,907
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    by the way jeffery - welcome to AUGI.

  8. #8
    AUGI Addict luigi's Avatar
    Join Date
    2015-11
    Location
    Royal oak, Michigan
    Posts
    1,512
    Login to Give a bone
    0

    Default Re: ???1-2-3 Revit: BIM and Algorithmic Form Finding

    Hi Jeffrey...are you by any chance a Jeffrey Saad that might know a Luigi Coletta?

    The amounts of bends is directly related to the amount of levels in the family....when I am in the office I will see which parameter it is...

    or did you mean the actual angle and disposition from the center of each level?

    Quote Originally Posted by jeffery.saad View Post
    Has any one look at this article and been able to read what you type into the family type box to make it happen?


    http://aec.cadalyst.com/aec/article/....jsp?id=402757

    I'm trying to do the twisting tower thing, and having problems with controling the amount of twist in the bleng.

Similar Threads

  1. Replies: 0
    Last Post: 2014-11-30, 01:16 PM
  2. Replies: 1
    Last Post: 2010-08-07, 11:16 PM
  3. ALGORITHMIC MODELING IN REVIT???
    By lamont_edwards in forum Revit Architecture - General
    Replies: 3
    Last Post: 2008-09-17, 04:15 PM
  4. Revit Architecture and algorithmic formulas
    By oliver.smith in forum Revit Architecture - General
    Replies: 6
    Last Post: 2007-09-19, 12:56 PM
  5. Cut Geometry, Solid form, Void form
    By mmolina in forum Revit Architecture - General
    Replies: 2
    Last Post: 2005-05-11, 09:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •