Help me rotate element

[jsteinhauer]

Hi all,

I'm trying to create a PV bracket, that will be able to be rotated around a pipe. I am having trouble figuring out how to get it to rotate. Can someone please take a look at my bracket thus far, and give me some pointers?

Thanks in advance,

Jeff S.

[eddy.lermytte]

This way ?

[jsteinhauer]

This way ?

Okay Eddie,

I thought I did that. What steps did you use to get this to work?

Thank you for the quick answer though.

Jeff S.

[eddy.lermytte]

Jeff

It takes about 15 seconds.
- set Parameter "pv angle" = 0
- go to the Left Elevation of your Rfa.
- Draw Ref Line as per attachment > place Angular Dimension > Label the Dimension
- Select the Bracket > Edit Work plane > Pick Plane > select the Ref. Plane of the Ref. Line parallel with Center(Left/Right) Ref. Plane.

[jsteinhauer]

Jeff

It takes about 15 seconds.
- set Parameter "pv angle" = 0
- go to the Left Elevation of your Rfa.
- Draw Ref Line as per attachment > place Angular Dimension > Label the Dimension
- Select the Bracket > Edit Work plane > Pick Plane > select the Ref. Plane of the Ref. Line parallel with Center(Left/Right) Ref. Plane.

The last step is the one I missed.

Thank you Eddie,

Jeff S.