Results 1 to 9 of 9

Thread: Road markings

  1. #1
    Member
    Join Date
    2007-12
    Posts
    10
    Login to Give a bone
    0

    Default Road markings

    Hey,
    hope someone has a simple answer for this, haven't had much chance to look into this but figured I would ask for some pointers before I start with stupid mistakes. Basically a project I'm working on involves new road layouts and parking which I need to model. I have done the actual physical aspect of the layout but need to get some of the road markings on this, they are on a dwg layer so is there a way i can make road markings more efficiently than making a new surface a few mm above the road surface, granted there are some slopes involved? I used to use the 3rd party glue script in 3ds max, but would rather keep everything in revit if at all possible.

    Cheers everyone

    Kris

  2. #2
    AUGI Addict
    Join Date
    2006-06
    Location
    Toronto, ON
    Posts
    2,386
    Login to Give a bone
    0

    Default Re: Road markings

    You don't have to create new surfaces. Just use the subregion tool. It will follow the slopes of the main toposurface.

    Andre Carvalho

  3. #3
    Member
    Join Date
    2007-12
    Posts
    10
    Login to Give a bone
    0

    Default Re: Road markings

    ah, i've modeled the new road and layouts simply as floors, seemed like the best solution at the time. Is there anything similar you can do with floors, or should I redo it as a toposurface?

  4. #4
    AUGI Addict
    Join Date
    2006-06
    Location
    Toronto, ON
    Posts
    2,386
    Login to Give a bone
    0

    Default Re: Road markings

    No, if it is flat, keep it as floors. You could try using Split Surfaces, then.

    Andre Carvalho

  5. #5
    Member
    Join Date
    2007-12
    Posts
    10
    Login to Give a bone
    0

    Default Re: Road markings

    Sorry for the delayed reply, thanks again though andre. I'm a little confused with the split surfaces suggestion, I've used this before with toposurfaces, however if I go to do the same thing with a floor entity, the button for the tool is greyed out. Is there a different tool for this or am I going about this the wrong way. If there is a way of splitting the surface as can be done with toposurfaces this will definetely be a good method for what I need to do.

    Cheers again

    Kris

  6. #6
    AUGI Addict
    Join Date
    2006-06
    Location
    Toronto, ON
    Posts
    2,386
    Login to Give a bone
    0

    Default Re: Road markings

    Quote Originally Posted by kris.156000 View Post
    Sorry for the delayed reply, thanks again though andre. I'm a little confused with the split surfaces suggestion, I've used this before with toposurfaces, however if I go to do the same thing with a floor entity, the button for the tool is greyed out. Is there a different tool for this or am I going about this the wrong way. If there is a way of splitting the surface as can be done with toposurfaces this will definetely be a good method for what I need to do.

    Cheers again

    Kris
    I'm sorry. I wrote Split Surfaces, but what I meant was "Split Face". You can find it in the options bar, just beside the paint bucket. Split faces work with floors, walls, etc... Once you split the face it will allow you to apply a different materials to them by using the paint bucket.

    Andre Carvalho

  7. #7
    Member
    Join Date
    2007-12
    Posts
    10
    Login to Give a bone
    0

    Default Re: Road markings

    awesome, I knew there must have been someway of doing it, will give that a shot now,
    thanks again!

    Kris

  8. #8
    Login to Give a bone
    0

    Default Re: Road markings

    hello everyone,
    When it comes to the line marking services, you really have to do some research to make sure that you are choosing the right information. In that case your information is appropriate and appreciating line marking Melbourne. and industrial anti slip walkways, we specialise in surface treatment for bike/bus lanes on roads, and we also provide epoxy coatings and non-slip coatings for pedestrian areas that require a safety solution.

  9. #9
    Login to Give a bone
    0

    Default Re: Road markings

    Quote Originally Posted by aldricklkswalker780389 View Post
    hello everyone,
    When it comes to the line marking services, you really have to do some research to make sure that you are choosing the right information. In that case your information is appropriate and appreciating line marking Melbourne. Line marking in Melbourne and industrial anti slip walkways, we specialise in surface treatment for bike/bus lanes on roads, and we also provide epoxy coatings and non-slip coatings for pedestrian areas that require a safety solution.


Similar Threads

  1. Road Markings and Text
    By nsinha73 in forum Revit Architecture - General
    Replies: 1
    Last Post: 2009-02-11, 10:22 PM
  2. Roadway Pavement Markings
    By civil3d.wishlist1941 in forum Civil 3D Wish List
    Replies: 0
    Last Post: 2009-02-01, 07:18 PM
  3. Blyth Road
    By Steve_Bennett in forum DV - Gallery
    Replies: 8
    Last Post: 2008-03-14, 06:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •