See the top rated post in this thread. Click here

Page 1 of 11 12345 ... LastLast
Results 1 to 10 of 106

Thread: State Seals

  1. #1
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    0

    Wink State Seals

    By now, most of us are using computer generated Architect/Engineer seals for drawings. I have been tasked with getting seals in a CAD format for all the engineers in my office. Between them all, I have to find them for all 50 states. My question is, does anyone know of a site or resource where a person could go and download a .dwg of the state seals? For the states that allow them, that is. Or, would any of you be willing to send me seals for states, without your name or registration number on them, of course.

    So far, I have found that 3 states do not allow computer generated seals; Massachusetts (Rubber Stamp or Embossed only), Mississippi (Rubber Stamp or Embossed only), and New Jersey (Embossed Only). Do you guys know of any others?


    Moderator Note:
    Please see this post for a drawing with all U.S. state engineering seals.

    For an older list of other seals within this thread, see this post.
    Last edited by Opie; 2017-08-09 at 01:29 PM. Reason: Added moderator note ~Opie

  2. #2
    Administrator rkmcswain's Avatar
    Join Date
    2004-09
    Location
    Earth
    Posts
    9,803
    Login to Give a bone
    0

    Default Re: State Seals

    The Texas Board of Professional Engineers does not provide a digital seal, but you can use on if you have it, subject to the rules here: http://www.tbpe.state.tx.us/download...ules042708.pdf (see page 53).
    R.K. McSwain | CAD Panacea |

  3. #3
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,096
    Login to Give a bone
    0

    Default Re: State Seals

    I believe Florida requires a wet stamp on every drawing. It is just heresay from one of our engineers. I have no first hand knowledge on Florida.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  4. #4
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    0

    Default Re: State Seals

    I actually looked up Florida, and they do allow a computer generated stamp. Before that, they only allowed embossed. I still need a Florida .dwg stamp too

    The statute on it is http://www.leg.state.fl.us/Statutes/...471/ch0471.htm
    Last edited by dreaded.knight; 2008-10-10 at 01:13 PM.

  5. #5
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,096
    Login to Give a bone
    0

    Default Re: State Seals

    Quote Originally Posted by dreaded.knight View Post
    I actually looked up Florida, and they do allow a computer generated stamp. Before that, they only allowed embossed. I still need a Florida .dwg stamp too

    The statute on it is http://www.leg.state.fl.us/Statutes/...471/ch0471.htm
    You might also check out this post on AUGI.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  6. #6
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    0

    Default Re: State Seals

    Quote Originally Posted by Opie View Post
    You might also check out this post on AUGI.
    Thanks, that DB helps out with quite a bit of the legwork. Still, is anyone willing to send their CAD versions of seals to me? Maybe we could set up something here that people can just go and download the entire array of seals.

  7. #7
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    0

    Default Re: State Seals

    Ok, so far I have New York, Oklahoma, Kansas, Texas, Colorado and Minnesota, that I am posting later this afternoon.

  8. #8
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    1

    Default Re: State Seals

    Here they are
    Attached Files Attached Files

  9. #9
    Member
    Join Date
    2008-10
    Posts
    46
    Login to Give a bone
    1

    Default Re: State Seals

    Only allowed 5 attachments per post,
    Attached Files Attached Files
    • File Type: dwg TX.dwg (151.9 KB, 879 views)

  10. #10
    100 Club
    Join Date
    2006-07
    Posts
    130
    Login to Give a bone
    0

    Default Re: State Seals

    Quote Originally Posted by dreaded.knight View Post
    So far, I have found that 3 states do not allow computer generated seals; Massachusetts (Rubber Stamp or Embossed only), Mississippi (Rubber Stamp or Embossed only), and New Jersey (Embossed Only). Do you guys know of any others?
    Here's an XLS summary (from an in-house database) of the state requirements you might find handy. The info is a few years old, but most should still be valid. This was compiled from info beginning with the site: http://www.ncees.org/licensure/licensing_boards/

    Also, be aware that many of the local jurisdictions have their own requirements DESPITE what the state requirements say.

    HTH
    Attached Files Attached Files

Page 1 of 11 12345 ... LastLast

Similar Threads

  1. Managing seals
    By AaronC in forum Revit MEP - General
    Replies: 10
    Last Post: 2012-07-19, 02:46 PM
  2. Electronic Seals on Drawings
    By joshuawulf in forum CAD Management - General
    Replies: 17
    Last Post: 2009-04-14, 01:22 PM
  3. Official Cadized State Seals??
    By cadpro78 in forum CAD Standards
    Replies: 23
    Last Post: 2008-12-16, 03:23 PM
  4. Engineering Seals
    By csutton2181 in forum Revit MEP - General
    Replies: 7
    Last Post: 2008-11-21, 10:46 PM
  5. Visibility of seals
    By bskripac in forum Revit Architecture - General
    Replies: 4
    Last Post: 2005-12-22, 06:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •