Results 1 to 2 of 2

Thread: Profile Design Criteria

  1. #1
    100 Club
    Join Date
    2003-01
    Location
    Denver, Colorado
    Posts
    199
    Login to Give a bone
    0

    Default Profile Design Criteria

    I am working on a design profile. I cannot get the profile to read any design criteria. When I go to the profile layout parameters it says the design speed is 0. I guess Im missing how to assign the aashto standards. Can someone walk me through this? I can get it work on aligments.

  2. #2
    Active Member
    Join Date
    2007-08
    Posts
    94
    Login to Give a bone
    0

    Default Re: Profile Design Criteria

    In order to use a design speed on a profile you must have the design speed and design criteria set up for the alignment. Refer to the following steps and the attached screen-shot to set that up:

    1. Go to the alignment properties and select the 'Design Criteria' tab. You must be in the source drawing for the alignment. If you dont have a design speed created yet select the add design speed button.

    2. Change the design speed to the desired design speed.

    3. Check the 'Use criteria-based design' button.

    4. Browse to select the design criteria. C3D by default has both 2001 and 2004 AASHTO standards.

    5. Select the desired standard.

    The design criteria setup for the profile is nearly identical. The design criteria will not work for the profile until you have it set up for the alignment.
    Attached Images Attached Images

Similar Threads

  1. 2014: Design Editor Criteria - Alguien sabe de esto???????
    By rick071589 in forum Español - AutoCAD Civil 3D
    Replies: 2
    Last Post: 2014-02-20, 03:29 PM
  2. 2011 AASHTO Design Criteria
    By Wish List System in forum Civil 3D Wish List
    Replies: 0
    Last Post: 2012-11-15, 05:51 PM
  3. Create Design Profile from a Polyline/Object within a Profile View.
    By Wish List System in forum Civil 3D Wish List
    Replies: 0
    Last Post: 2012-09-04, 08:22 PM
  4. Verify all product design criteria are met.
    By Wish List System in forum AutoCAD Wish List
    Replies: 2
    Last Post: 2012-06-05, 06:19 PM
  5. Criteria Based Design Options
    By civil3d.wishlist1941 in forum Civil 3D Wish List
    Replies: 1
    Last Post: 2007-10-08, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •