Results 1 to 10 of 12

Thread: Revit Tips & Tricks

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Default Revit Tips & Tricks

    Hello all!

    As your new Tips & Tricks forum manager, I decided to start a thread in an effort to consolidate some of the most new useful T&T that are posted on the Revit forums. If you see something worthy of making this list, feel free to send me a PM with a link and I'll post it here.

    You can also visit the Revit Classics Thread. There are some great time-tested goodies there too!
    Last edited by dbaldacchino; 2009-03-28 at 10:28 PM.

  2. #2
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    The solution comes courtesy of Marek Brandstatter in this thread. The key is to register revitpreview.dll properly. Follow these steps to fix the issue once and for all!

    NOTE: The path to the dll file has to match your installation path, so make sure to use the correct folder name for Revit Structure and Revit MEP.
    Last edited by dbaldacchino; 2009-01-23 at 04:25 AM.

  3. #3
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    This clever tip is brought to you by Revitator and you can read it in this thread. Sure, it's a workaround, but at least there's a way to do it! Now if someone could create a tool with Revit's API to do this....

    UPDATE: If you're a subscription customer, you can install the Revit Subscription Advantage Pack and you'll find a tool that converts between the two types of lines. So the workaround is no longer needed. Thanks Factory!
    Last edited by dbaldacchino; 2010-01-09 at 06:18 PM.

  4. #4
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    I came across this tip and just had to post it in our forums. Credit goes to Harlan Brumm of the blog Revit Clinic. I didn't know (or forgot!) that you could change the behavior of an Array after creating it; ie: changing the behavior from "move to 2nd" to "move to last" and vice versa.
    Last edited by dbaldacchino; 2009-01-23 at 04:26 AM.

  5. #5
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    I'm not taking credit for this, even though I posted it The idea to write it up came after this blog post juggled my memory, and I thought it would be useful to list it here as I know I've used this technique in the past. So let's all thank Mike Hacker of the blog Revit @ Waterman for this tip!
    Last edited by dbaldacchino; 2009-01-23 at 04:26 AM.

  6. #6
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    This can easily fit right in at the top of the Classics list, but it is still so relevant that I decided to place it here instead.

    The clever solution comes courtesy of Scott Hopkins in this thread, complete with a pdf tutorial that will explain the "bananas" out of the process
    Last edited by dbaldacchino; 2009-03-09 at 07:27 PM.

  7. #7
    Count (Formula) dbaldacchino's Avatar
    Join Date
    2005-07
    Location
    Missouri City, Texas (Houston area)
    Posts
    3,250
    Login to Give a bone
    0

    Thumbs up Re: Revit Tips & Tricks

    It is a shame that Revit doesn't have this tool built-in right out of the box. But thanks to the great sharing spirit of AUGI, we can still perform this elementary task by using the API tool that GuyR posted in this thread.

    Thanks also to Danny Polkinhorn that started this thread and contributed his work back when we had Revit Building 8.1, Revit Structure 2 and Revit systems 1 (I think!).

    UPDATE: If you're a subscription customer, you can install the Revit Subscription Advantage Pack and you'll find a Find/Replace text tool. Thanks Factory!
    Last edited by dbaldacchino; 2010-01-09 at 06:21 PM.

Similar Threads

  1. Tips & Tricks - Revit Classics
    By dbaldacchino in forum Revit Architecture - Tips & Tricks
    Replies: 11
    Last Post: 2010-04-15, 06:25 PM
  2. Tips & Tricks - Revit Architecture
    By dbaldacchino in forum Revit Architecture - Tips & Tricks
    Replies: 1
    Last Post: 2009-01-15, 03:48 AM
  3. Revit Tips & Tricks
    By dbaldacchino in forum Revit Structure - Tips & Tricks
    Replies: 1
    Last Post: 2008-12-23, 03:52 PM
  4. Revit Tips & Tricks
    By dbaldacchino in forum Revit MEP - Tips & Tricks
    Replies: 1
    Last Post: 2008-12-23, 03:52 PM
  5. Welcome to Revit Systems Tips & Tricks!!
    By Steve_Stafford in forum Revit MEP - Tips & Tricks
    Replies: 0
    Last Post: 2006-03-25, 10:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •