Extract 'Sheet set' (2D) from Revit models to “PLAN” on BIM360

[SunYog]

Hello All,
Regarding BIM360 page,
Do we able to copy / Extract “Publish Sheet set” (2D) directly from Revit models to “PLAN” on BIM360?
I used following method
- Publish models
- After successfully Published the models (After stops spinning hourglass on page)
- Download latest 'main' model from BIM360 (ZIP, if linked models are in parent model)
- Verify links models are linked into the main model.
- Create central main model

- Make sure ‘Publish Set’ is created in the Revit model.
- Upload Revit model in “Plan”. Extract Sheet Set and upload Revit model too.

(NOT SURE - All link models also need to be upload – Otherwise links may shows missing in sheets.
If we need to upload links model too, then they should be 'Standalone' and NOT included 'Publish Set' otherwise they will extracted at location. Please confirm.)
- Takes time depending upon model size and number of sheets to be extracted.

(Please let me know if anything I am missing or incorrect method / steps )

Now question is, Is it possible from Project File / Shared folder OR 'Root' folder (where live models are located)
COPY / Extract /Publish sheets set to PLANS -> Progress print (Separate sheets)?

Please find attached snips for reference only.

Thanks & Regards
Yogesh

001.jpg002.jpg

[SunYog]

Requesting Admin,
Please move this post at appropriate Thread if mistakenly posted here.